beautypg.com

Network management and system access – Artesyn Centellis 2000 Shelf Release 3.0 Installation and Use (May 2014) User Manual

Page 155

background image

Network Management and System Access

Centellis 2000 Shelf Release 3.0 Installation and Use (6806800L99G)

155

Virtual Standby IP Address on Out-of-Band Interface

To avoid an address conflict between out-of-band and backplane interfaces, 100 is added to
the third octet of all out-of-band interface IP addresses, if any of them would be equal to one of
the backplane addresses otherwise.

Changing the Shelf Manager Virtual IP Address for the Out-of-Band Interface

To change the Shelf Manager Virtual IP address:

Modify the first two octets of the shelf IP connectivity Record #1
or

Change the shelf address
or

Modify the first two octets of the shelf IP connectivity Record #1 and also change the shelf
address

Refer

Setting the Shelf Geographical Address

on page 151

, to see how you can change the shelf

address.

1. Change the first two octets of the IP address using the hpiship tool located on the

shelf manager. Use the option -h for help.

2. Change the third octet of the IP address by changing the shelf address.

3. Reboot the system for the changes to take effect.

Netmask of IP1

Virtual Standby IP Address

Default Value

255.0.0.0

...181

192.168.0.181

255.255.0.0

255.255.255.0

If the third octet of the IP address is changed using hpiship, it is temporary and will be
changed automatically on the next reboot to match the shelf address.