3 removing the system – Artesyn Centellis 2000 Shelf Release 3.0 Installation and Use (May 2014) User Manual
Page 100
System Installation
Centellis 2000 Shelf Release 3.0 Installation and Use (6806800L99G)
100
3.4.3
Removing the System
If the system is too heavy, you can remove the blades before removing the system.
Removing the System
To remove the system from a rack, proceed as follows:
1. Disconnect all power input cables.
2. Disconnect all cables from the blades, RTMs, MF106 and user cards.
3. Remove the earth ground connection.
4. Loosen and remove the mounting screws.
5. Remove the system from the rack.
The system has to be powered down before the removal (see
).