Artesyn Centellis 2000 Shelf Release 3.0 Installation and Use (May 2014) - Manual (Page 164)

Network Management and System Access
Centellis 2000 Shelf Release 3.0 Installation and Use (6806800L99G) 164
GATEWAY=
 Heartbeat Addresses
The ppp0 and ppp1 serial links are used for the heartbeat interfaces between Shelf
Managers. The addresses can be modified by changing the values associated with
HB1_BASE
and HB2_BASE.
HB1_BASE=192.168.101.0
HB2_BASE=192.168.102.0
 Switch Slot IP Addresses
The C2000 shelf does not use the SWITCH_SLOT_IPADDR variable.
8.3.4 Restoring Factory Settings
To restore factory settings:
1. Login either through the serial port, or by using ssh to the Shelf Manager.
2. Remove everything in the persistent file area. For example:
cd /usr/local
, rm -rf *
3. Reboot the Shelf Manager.
Shelf Manager boots up using the factory settings.
The last octet is obtained from the SLOT value, so only the first three octets are configurable.
This does not include the Shelf IP addresses or Shelf Geographical Address stored in the Shelf
FRU data.