Artesyn Centellis 2000 Shelf Release 3.0 Installation and Use (May 2014) - Manual (Page 74)

Site Preparation
Centellis 2000 Shelf Release 3.0 Installation and Use (6806800L99G) 74
2.3.1 Environmental Requirements
To ensure proper function of the system, make sure that the environment in which the system
is to be used fulfills the environmental requirements.
The environmental values must be tested and proven in the planned system configuration,
that is, the delivered system and other third-party products you want to integrate.
The following table lists the environmental requirements.
 Operating temperatures refer to the temperature of the air circulating at the air intake of
the system and not to component temperatures.
 Some of the climatic values may exceed the specification of some system components
(for example, hard disks). As Artesyn cannot guarantee the functionality of third party
products that are handled or operated out of their specifications, the environmental
conditions may be limited to the specifications of these components.
Table 2-1 Environmental Conditions
Feature Operating Non-Operating (packed state)
Temperature +5 ºC (41 °F) to +40 ºC (104 °F)
(normal operation) according to NEBS
standard GR-63-CORE
-5 °C (23 °F) to +55 °C (131 °F)
(exceptional operation) according to NEBS
standard GR-63-CORE -40 °C (-40 °F) to +70 °C (158 °F)
Temp. change +/-0.5 °C/min according to NEBS standard
GR-63-CORE +/-0.5 °C/min
Relative
humidity 5% to 90% non-condensing
according to Artesyn-internal
environmental requirements 5% to 95% non-condensing
according to Artesyn-internal
environmental requirements
Vibration
(tested in
target
platform) 0.1 g from 5 to 100 Hz and back to 5 Hz at
a rate of 0.1 octave/minute 5-20 Hz at 0.01 g
2
/Hz
20-200 Hz at -3.0 dB/octave
Random 5-20 Hz at 1m
2 /Sec 3
Random 20-200 Hz at -3 dB/octave
Shock Half-sine, 11 mSec, 30 m/Sec 2 Blade level packaging
Half-sine, 6 mSec at 180 m/Sec
2