CIRCUTOR PowerStudio Series - Manual (Page 33)

PowerStudio
User Manual 33
4. Reconnection enabled. Reports that channel reconnections have been enabled.
5. Reset button. If the channel is triggered, the button will remain disabled. Push the button to
restart the channel.
6. OFF button. External disconnection of the channel. The button will remain disabled if the
channel has not been triggered.
7. Adjustment button. Enables programming of sensitivity and channel delay. Channel
information is also shown.
8. Channel trip threshold value configured.
9. Channel pre-alarm value configured.
10. Channel instantaneous differential current value.
11. When the channel Instantaneous differential current value exceeds the limits of the value bar,
either in excess or default, this will be indicated as shown in the figure (arrow below the value).
12. Differential current value detected when the channel triggers.