CIRCUTOR PowerStudio Series - Manual (Page 224)

PowerStudio PowerStudio
224 User Manual
Configuration of the frequency of the operating system.
Configuration of the polarity of the trigger coil relay output, allowing one of the two possible
options to be selected (standard or positive).
Configuration of the channel trigger threshold. It will be possible to select one of the following
values:
0.03 A 0.1 A 0.3 A
0.5 A 1 A 3 A
5 A 10 A 30 A
Enables the trigger delay time from one of the following values to be selected:
Instantaneous Selective 20 ms
100 ms 200 ms 300 ms
400 ms 500 ms 750 ms
1 s 3 s 5 s
10 s
It will be possible to configure the pre-alarm following parameters:
• Pre-alarm threshold. Where can % of the nominal current can be defined to activate
the pre-alarm, this value will vary between 50 and 90%.
• Delay time on activation. Enable the time delay in activating the pre-alarm to be
selected from among the following values:
0.02 s 0.10 s 0.20 s
0.30 s 0.40 s 0.50 s
0.75 s 1.00 s 3.00 s
5.00 s 10.00 s
• Polarity of the pre-alarm relay output.
• Pre-alarm operating mode.