3 4 digital outputs / 4 analogue outputs, 4 digital outputs / 4 analogue outputs – CIRCUTOR PowerStudio Series User Manual

Page 127

Text mode
Original mode

PowerStudio

User Manual 127

1.32.1.3.3 4 digital outputs / 4 analogue outputs

Use

to switch between configuring analogue and digital card outputs. In the

previous image the configuration of the digital outputs can be seen.

For more information on configuring the digital outputs consult the section 1.32.1.3.1 Digital

input / output.

Analogue output configuration is shown in the following image:

For each of the analogue inputs the following can be configured:

• Variable: Permits any parameter the device measures for analogue outputs to be selected

• Value -5 mA: Value of the parameter which is assigned to the -5 mA output.

• Value +5 mA: Value of the parameter which is assigned to the + 5 mA output.