CIRCUTOR PowerStudio Series - Manual (Page 202)

PowerStudio PowerStudio
202 User Manual
Shows general information.
Device screen display options.
• Omit reactive measurement: The reactive measurements are not shown on the device
screen, although they will continue to be displayed on the software display screens.
• Omit partial counters: Partial counter measurements are not shown on the device screen or
the software display screen.
Flow direction
Configuration of the "backlight" disconnection. The value should oscillate between 0
and 10 seconds.
Click the button to start all the device partial counters.
Configuration of the number of quadrants. With 2 quadrants only the
consumed energy counters will be taken into consideration; with 4 both the consumed and generated
energy counters will be considered.
Active energy output relay configuration. You may configure the number of
Wh equivalent per output impulse and the variable that will be a measured to give this pulse. If the
pulse value is 0, the output will be treated like a standard digital output, enabling its value to be forced
from 0 to 1.
Reactive energy output relay configuration. The number of VArh equivalent
per output pulse and the variable that will be a measured to give the pulse can be configured. If the
pulse value is 0, the output will be treated like a standard digital output, enabling its value to be forced
from 0 to 1.