CIRCUTOR PowerStudio Series - Manual (Page 109)

PowerStudio
User Manual 109
• Max: This checkbox shows the maximum value that must be controlled. If an energy variable
is selected, the value of each pulse will be indicated.
• Min: This checkbox shows the minimum value that must be controlled. If you select an energy
variable, this field will remain disabled.
• Delay: Alarm delay in seconds after activation. The maximum value is 9999 seconds. This
field will be disabled if an energy variable has been selected.
• Hysteresis: Tolerance margin during the activation and deactivation of the alarm. The
maximum value is 99%. This field will be disabled if an energy variable has been selected.
• Interlocking: Configuration of the relay's interlocking when the alarm is activated.
• Delay off: Alarm delay in seconds after deactivation. The maximum value is 9999 seconds.
This field will be disabled if an energy variable has been selected.
• Status: Contact status. The value can be ‘Normally open’ or ‘Normally closed’. This field will be
disabled if an energy variable has been selected.
In the “Tariffs” tab
All values entered in the corresponding checkboxes will be loaded when the configuration is
sent.
• Reset meter: The energy meters will be reset to 0 when you click on this button.
• Reset total time meter: The total time meters will be reset to 0 when you click on this
button.
In the “Display” tab,
• Backlight time: Configuration of the backlight switching-off time. The value should be
between 0 and 99 seconds.
• View harmonics: Optional display of the harmonics on the device's display.
• Work profile: Selection of the desired work profile. Each profile will show determined
screens. The screens to be displayed can be selected in the "User" profile.