CIRCUTOR PowerStudio Series - Manual (Page 122)

PowerStudio PowerStudio
122 User Manual
1.32.1.3 Expansion Cards
Configuration options may or may not appear according to the number and type of expansion
cards in the device.
1.32.1.3.1 Digital input / output
Depending on the card model, the number of inputs and outputs may vary.
Use to switch between card input and output configuration. The previous
image shows configuration of the digital inputs.
Each of the digital inputs may be configured as a digital input and therefore the status of the
input can be monitored (open or closed) or used as a meter, counting the number of pulses that occur
in the digital input.
Configuring the input as digital:
 Type: The type should be selected as digital.
 Name: Alphanumeric data type for the identification of the digital input on the
device display.
Otherwise it will be configured as a meter
 Type: The type must be set to meter.
 Name: Alphanumeric type data to identity the meter on the device display.