CIRCUTOR PowerStudio Series - Manual (Page 30)

PowerStudio PowerStudio
30 User Manual
Shows general information.
This selector allows the equipment to have the channel reconnections enabled or not.
Depending on whether the reconnections of the configuration fields of the channels are enabled or not.
Clicking on the button ‘Synchronize clock’ the present time will be sent to the PC.
The following can be configured:
• Type of pre-alarm relay. Operation method of the pre-alarm relay common to all
channels of the device.
• Pre-alarm threshold. Pre-alarm threshold the equipment possesses. This can vary
between 50 and 100% of the minimum trigger threshold of the device channels.
A trigger threshold and a personalized delay time can be configured by the user. These
parameters are common to all channels of the device. Depending on the type of channel selected, the
customized threshold may be selected or not.
Shows the channel configuration.