2 analogue inputs and outputs, 3 variable limits, Analogue inputs and outputs – CIRCUTOR PowerStudio Series User Manual

Page 144: Variable limits

Text mode
Original mode

PowerStudio PowerStudio

144 User Manual

1.37.1.2 Analogue inputs and outputs

From this dialogue the analogue inputs on the CVM-R8 devices with analogue inputs and/or

outputs can be configured.

• Description: Alphanumeric type information which enables a brief description to be entered

for better identification.

• Unit: Alphanumeric type data which permits a brief description of the units to be entered.

• Zero: Value of the parameter to which the zero of the scale is assigned.

• Fullscale: Value of the parameter to which the maximum value of the scale is assigned.

• Type: Type of entry, allows between 0-20 mA, 4-20 mA or 0 -? to be chosen V

1.37.1.3 Variable limits

Only for CVM-R8 devices with analogue inputs.

This option has been detailed in section 1.1.3 Variable limits.