CIRCUTOR PowerStudio Series - Manual (Page 283)

PowerStudio
User Manual 283
2.1.11.3 CBS-4
Differential current Status
Instantaneous Detected Of the channel Of the protection
Pre-alarm relay
Channel x (x:1..4)
AELIx AELDx STx DOx DO0
CBS-4 X X X X X
Channel status Value
Not Triggered 0
Differential current exceeded 1
Toroid error 2
Protection status Value
Not enabled 0
Enabled 1
Pre-alarm relay status Value
Not enabled 0
Enabled 1
On CBS-4 devices we can reset the x channel forcing the status variable of the RSTx to value
0 or remotely trigger the channel forcing the variable to 1.
2.1.11.4 CBS-8, CDR-8
Differential current Status
Instantaneous Detected Of the channel Of the protection
Pre-alarm relay
Canal x (x:1..8)
AELIx AELDx STx DOx DO0
CBS-8 X X X X X
CDR-8 X X X X X
Status of the channel output Value
Not Triggered 0
Differential current exceeded 1
Output triggered 2
Output locked 3
Pre-alarm relay status Value
Not enabled 0
Enabled 1
On CBS-8 and CDR-8 devices we can reset the x channel forcing the status variable of the
(STx) to value 16.
We can also remotely trigger the x channel forcing the RFCx variable to 1 to activate remote
triggering or 0 to deactivate it.
2.1.11.5 CCL
Plug x (x:1..6)
Total active energy AEx
Partial active energy AEPx
Active power APIx
Digital output DOx
Car connected CCx
Digital input AUXx
Bollard state STATEx
Identifier TAGx