2 device inputs, Device inputs – CIRCUTOR PowerStudio Series User Manual

Page 178

Text mode
Original mode

PowerStudio PowerStudio

178 User Manual

Shows general information.

This part of the configuration corresponds to the device counters.

If the selector is checked,

on sending the configuration the energy counter will be loaded with the values entered into the
corresponding boxes.

1.45.1.2 Device inputs

For each of the inputs of the LM-24 M, three variables will be available, a digital display to

show the status of the input (open / closed), a counter variable to show the number of pulses detected
at the input, and finally a flow variable calculated by the software as an estimate of the pulse frequency
on the input during a space of time.

By means of this dialogue the LM-24 M inputs can be configured.