2 inputs, Inputs – CIRCUTOR PowerStudio Series User Manual

Page 198

Text mode
Original mode

PowerStudio PowerStudio

198 User Manual

1.49.1.2 Inputs

For each of the LM50-TCP inputs three variables will be available, a digital one to show the

input status (open / closed), a counter variable to show the number of pulses detected in the input and
finally a flow variable calculated by the software as an estimate of the pulse frequency that occurs in
the input during a period of time.

By means of this dialogue the LM50-TCP input can be configured,

Using the

display configuration of the different types of variables can

be configured. The previous image shows the configuration of the counters, where:

• Description: Alphanumeric type which permits a brief description of the counter so it

can be identified better.

• Unit: Alphanumeric type data which permits a brief description of the units where the

counter is displayed to be entered.

• Factor: Multiplier value of each input pulse.