BINDER KB 23 - Manual (Page 79)

KB (E3.1 + E5.1) 11/2014 page 79/100
18. Disposal
18.1 Disposal of the transport packing
Packing element Material Disposal
Straps to fix packing on pallet Plastic Plastic recycling
Wooden transport box (option)
with metal screws
Non-wood (compressed
matchwood, IPPC standard)
Wood recycling
Metal Metal recycling
Pallet
with foamed plastic stuffing
Solid wood (IPPC standard) Wood recycling
PE foam Plastic recycling
Shipping box
with metal clamps
Cardboard Paper recycling
Metal Metal recycling
Top cover Cardboard Paper recycling
Edge protection Styropor ® or PE foam Plastic recycling
Protection of doors and racks PE foam Plastic recycling
Bag for operating manual PE foil Plastic recycling
Insulating air cushion foil (packing
of optional accessories)
PE foil Plastic recycling
If recycling is not possible, all packing parts can also be disposed of with normal waste.
18.2 Decommissioning
Turn off the main power switch (1). Disconnect the unit from the power supply.
When switching off the main power switch ON / OFF (1), the stored parameters remain saved.
• Temporal decommissioning: See indications for appropriate storage, chap. 3.3.
• Final decommissioning: Dispose of the unit as described in chap. 18.3 to 18.5.
18.3 Disposal of the unit in the Federal Republic of Germany
According to directive 2002/96/EC of the European Parliament and of the Council on waste electrical and
electronic equipment (WEEE), BINDER devices are classified as “monitoring and control instruments”
(category 9) only intended for professional use“. They must not be disposed of at public collecting points.
The cooling incubator KB bears the symbol for the marking of electrical and electronic
equipment manufactured / placed on the market in the EC after 13 August 2005 and be
disposed of in separate collection according to the directive 2002/96/EC on waste electrical
and electronic equipment (WEEE) and German national law for electrical and electronic
equipment (Elektro- und Elektronikgerätegesetz, ElektroG). WEEE marking: crossed-out
wheeled bin with solid bar under. A significant part of the materials must be recycled in
order to protect the environment.
At the end of the device’s service life, have the device disposed of according to the German national law
for electrical and electronic equipment (Elektro- und Elektronikgerätegesetz, ElektroG) from 23 March
2005, BGBl. I p. 762 or contact BINDER service who will organize taking back and disposal of the unit
according to the German national law for electrical and electronic equipment (Elektro- und
Elektronikgerätegesetz, ElektroG) from 23 March 2005, BGBl. I p. 762.