BINDER KB 23 - Manual (Page 74)

KB (E3.1 + E5.1) 11/2014 page 74/100
Maximum loading capacity of the switching contacts: 24V AC/DC – 2.5 A
DANGER
Electrical hazard.
Danger of death.
Damage to switching contacts and connection socket.
∅
Do NOT exceed the maximum switching load of 24V AC/DC – 2.5A.
∅ Do NOT connect any devices with a higher loading capacity.
16.7 Additional flexible Pt 100 temperature sensor (option for KB 53, 115)
An additional flexible Pt100 temperature sensor allows measuring the temperature of the charging
material by means of an independent measuring system utilizing Pt 100 entry. The Pt 100 sensor’s top
protective tube can be immersed into liquid substances.
Technical data of the Pt100 sensor:
•
Three-wire technique
• Class B (DIN EN 60751)
• Temperature range up to 320 °C / 608 °F
• Stainless steel protective tube with a length of 45
mm / 1.78 in, material no. 1.4501
Lemo socket
Lemo plug
Figure 22: Option Pt 100 temperature sensor
16.8 Additional flexible Pt 100 temperature sensor (option for KB 240, 400, 720)
An additional flexible Pt100 temperature sensor allows measuring the temperature of the charging
material by means of an independent measuring system utilizing Pt 100 entry. The Pt 100 sensor’s top
protective tube can be immersed into liquid substances.
Pt 100 Sensor
PIN 1: Pt 100
PIN 2: Pt 100
PIN 3: Pt 100
DIN socket (9)
DIN plug
A suitable DIN plug is enclosed.
Figure 23: Pin configuration of the DIN socket (9) in the right lateral control panel
Technical data of the Pt100 sensor:
•
Three-wire technique
• Class B (DIN EN 60751)
• Temperature range up to 320 °C / 608 °F
• Stainless steel protective tube with a length of 45 mm / 1.78 in, material no. 1.4501
1 2 3 4 5 6
1 2 3 4 5 6
1 2 3
1 2 3
2 3
1