Installation of the equipment, 1 spacers for wall distance (kb 240, 400, 720), Danger – BINDER KB 23 User Manual
Page 23
KB (E3.1 + E5.1) 11/2014
page 23/100
With an increased amount of dust in the ambient air, clean the condenser fan (by suction or blowing)
several times a year.
Avoid any conductive dust in the ambiance according to the unit layout complying with pollution degree 2
(IEC 61010-1).
Do not install or operate the unit in potentially explosive areas.
DANGER
Explosion hazard.
Danger of death.
∅
Do NOT operate the unit in potentially explosive areas.
KEEP explosive dust or air-solvent mixtures AWAY from the vicinity of the unit.
4.
Installation of the equipment
4.1 Spacers for wall distance (KB 240, 400, 720)
Please fix both spacers with the supplied screws at the unit rear. This serves to ensure the prescribed
minimum distance to the wall of 100 mm / 3.94 in.
Figure 9: Spacer for rear wall distance
Figure 10: Rear KB (E5.1) with mounted spacers