BINDER KB 23 - Manual (Page 57)

KB (E3.1 + E5.1) 11/2014 page 57/100
Press key
Display 1 shows 0000
Display 2 shows Ch1 = SP2: Off
(entry of state of channel 1)
(actual setting: OFF)
Enter the state of channel 1
Off using arrow keys
Setting is shown in display 2.
Press key
Display 1 shows 0000
Display 2 shows Channel 2: Off
(entry of state of channel 2)
(actual setting: Off)
Press key EXIT
Display 1 shows 20.00 (time of the selected shift point)
Display 2 shows S1: 20:00 - -
(actual selection of the shift point: S1)
(actual setting: time 20.00, channels OFF)
Press several times key EXIT
or wait for 120 seconds
Controller returns to normal display.