BINDER KB 23 - Manual (Page 11)

KB (E3.1 + E5.1) 11/2014 page 11/100
Indications of the type plate
Information
BINDER Manufacturer: BINDER GmbH
KB 240 Model designation
Cooling incubator Device name
Serial No. 00-00000 Serial no. of the unit
Built 2014 Year of construction
Nominal temperature
100 °C
212°F
Nominal temperature
Enclosure protection IP 20 IP type of protection acc. to EN 60529
Temp. safety device DIN 12880 Temperature safety device acc. to standard DIN 12880
Class 3.1 Class of temperature safety device
Art. No. 9020-0241 Art. no. of the unit
Project No. --- Optional: Special application acc. to project no.
1,20 kW Nominal power
200-240 V 1 N ~ Nominal voltage +/-10%, phase indication
5,2 A Nominal current
50 Hz Power frequency
Max. operating pressure 15 bar Max. operating pressure in the refrigerating system
R 134A - 0,35 kg Refrigerant type and max. filling weight
Contains fluorinated greenhouse
gases covered by the Kyoto Protocol
Contains fluorinated greenhouse gases covered by the Kyoto
Protocol
Symbol on the type plate
Information
CE conformity marking
Electrical and electronic equipment manufactured / placed on the market
in the EC after 13 August 2005 and to be disposed of in separate
collection according to directive 2002/96/EC on waste electrical and
electronic equipment (WEEE).
The equipment is certified in the GOST R certification system of
GOSTSTANDARD Russia.
LABORATORY EQUIPMENT
43KM
(KB-UL only)
The equipment is certified by Underwriters Laboratories Inc. ® according
to standards CAN/CSA-C22.2 No. 61010-1, 2nd Edition, 2004-07
(Electrical Equipment for Measurement, Control, and Laboratory Use;
Part 1: General Requirements); UL 61010-1, 2nd Edition, 2005-07-22
(Electrical Equipment for Measurement, Control, and Laboratory Use;
Part 1: General Requirements); IEC 61010-1:2001, 2nd Edition and IEC
61010-2-10 (Particular Requirements for Laboratory Equipment for the
heating of materials).