2 electrical connection, Caution – BINDER KB 23 User Manual

Page 24

KB (E3.1 + E5.1) 11/2014

page 24/100

4.2 Electrical connection

The cooling incubators KB are supplied ready for connection.
•

The cooling incubator KB (E3.1) comes with a fixed power connection cable that has a length of 1800

mm / 5.9 ft and is equipped with a semi time-lag fine-wire fuse.

•

The cooling incubator KB (E5.1) comes with a fixed power connection cable that has a length of 1800

mm / 5.9 ft.

Model

Power plug

Voltage

+ /-10 %

Current

type

Power

frequency

Unit fuse

KB 23 (E3.1)

Shock-proof plug

230 V

1N~

50/60 Hz

10 Amp

KB 53 (E3.1)

KB 115 (E3.1)

Shock-proof plug

230 V

1N~

50 Hz

10 Amp

KB 23-UL (E3.1)
KB 53-UL (E3.1)

KB 115-UL (E3.1)

NEMA 5-15

115 V

1N~

60 Hz

12,5 Amp

KB 240 (E5.1)

Shock-proof plug 200 V to 240 V

1N~

50 Hz

16 Amp

KB 400 (E5.1)
KB 720 (E5.1)

Shock-proof plug 200 V to 240 V

1N~

50/60 Hz

16 Amp

KB 240-UL (E5.1)

NEMA 5-20P

100 V to 120 V

1N~

60 Hz

16 Amp

KB 400-UL (E5.1)

NEMA 5-20P

100 V to 120 V

1N~

50/60 Hz

16 Amp

KB 720-UL (E5.1)

NEMA 6-20P

200 V to 240 V

2 ~

50/60 Hz

16 Amp

•

The socket must also provide a protective conductor.

•

Prior to connection and start-up, check the power supply voltage. Compare the values to the specified

data located on the unit’s type plate (left unit side, bottom right-hand, see chap. 1.4).

•

When connecting, please observe the regulations specified by the local electricity supply company as

well as the VDE directives (for Germany). We recommend the use of a residual current circuit breaker.

•

Pollution degree (acc. to IEC 61010-1): 2

•

Over-voltage category (acc. to IEC 61010-1): II

CAUTION

Danger of incorrect power supply voltage.
Damage to the equipment.


Check the power supply voltage before connection and start-up.



Compare the power supply voltage with the data indicated on the type plate.