BINDER KB 23 - Manual (Page 62)

KB (E3.1 + E5.1) 11/2014 page 62/100
Press key
Display 1 shows 119 (actual section length set-point)
Display 2 shows
alternating
S01: TIME 119:59 (variable: section length in hhh:mm)
CONTINUE X/W (information: go on with X/W)
Enter section length set-point of S01 of 119
hs. 59 min. using arrow keys
Value is shown in both displays.
Press several times key until P01: --- SEC appears:
Display 1 shows 02 section S02 has been selected
Display 2 shows
alternating
P01: --- SEC.
enter new set-points for the individual variables with button
X/W.
CONTINUE X/W
or
NEW SEC. X/W
Select section S02 using arrow keys
Press key
Display 1 shows 20.0 C (actual temperature set-point)
Display 2 shows
alternating
S02: TEMP 20.0 (variable: temperature in °C)
CONTINUE X/W (information: go on with X/W)
Entry of temperature set-point of 20 in °C of
S02 using arrow keys
Press key
Display 1 shows 000 (actual section length set-point)
Display 2 shows
alternating
S02: TIME 000:01 (variable: section length in hhh:mm)
CONTINUE X/W (information: go on with X/W)
Enter section length set-point of S02 of 1
min using arrow keys
Value is shown in both displays.
Press several times key until P01: --- SEC appears:
Display 1 shows 03 section S03 has been selected
Display 2 shows
alternating
P01: --- SEC.
enter new set-points for the individual variables with button
X/W.
CONTINUE X/W
or
NEW SEC. X/W
Select section S03using arrow keys
Press key
Display 1 shows 5 C (actual temperature set-point)
Display 2 shows
alternating
S02:TEMP 5 (variable: temperature in °C)
CONTINUE X/W (information: go on with X/W)
Entry of temperature set-point of 5 °C of S03
using arrow keys