Pilz PMCprimo DriveP.01/AA0/4/0/0/208-480VAC - Manual (Page 87)

Technical details
Operating Manual PMCprotego S1­2(­C)
1002528­EN­02 87
Semiconductor outputs 680004 680008
Permitted current range 0,50 A 0,50 A
Residual current at "0" signal 0,02 mA 0,02 mA
Monitoring threshold of semicon­
ductor output
7,0 V 7,0 V
Max. duration of on time during self
test
200 µs 200 µs
Max. duration of off time during self
test
200 µs 200 µs
Short circuit­proof Yes Yes
Semiconductor outputs, 2­pole 680004 680008
Number of dual­pole semicon­
ductor outputs
1 1
Permitted current range 2,00 A 2,00 A
Typ. output current at "1" signal
and rated voltage of semiconductor
output
2,0 A 2,0 A
Galvanic isolation Yes Yes
Residual current at "0" signal 0,50 mA 0,50 mA
Times 680004 680008
Response time 4 ms 4 ms
Error reaction time 2 ms 2 ms
Environmental data 680004 680008
Climatic suitability EN 60068­2­1, EN 60068­2­14, EN
60068­2­2, EN 60068­2­30, EN
60068­2­78 EN 60068­2­1, EN 60068­2­14, EN
60068­2­2, EN 60068­2­30, EN
60068­2­78
Ambient temperature
In accordance with the standard DIN EN 60721­3­3 DIN EN 60721­3­3
Temperature range 0 ­ 40 °C 0 ­ 40 °C
Storage temperature
In accordance with the standard DIN EN 60721­3­1 DIN EN 60721­3­1
Temperature range ­25 ­ 55 °C ­25 ­ 55 °C
Climatic suitability
In accordance with the standard DIN EN 60721­3­3 DIN EN 60721­3­3
Humidity 85 % r.h. 85 % r.h.
Condensation during operation Not permitted Not permitted
EMC EN 61800­3 EN 61800­3
Vibration
In accordance with the standard IEC 721­3­3 IEC 721­3­3
Airgap creepage
In accordance with the standard EN 61800­5­1 EN 61800­5­1
Overvoltage category II II
Pollution degree 2 2