Pilz PMCprimo DriveP.01/AA0/4/0/0/208-480VAC - Manual (Page 28)

Function description
Operating Manual PMCprotego S1­2(­C)
1002528­EN­02 28
Timing diagram:
Braking ramp
s, v
t t1
SS1 SIL3/Reset
1
0
1
0
SOS delay time
Tolerance window
Braking ramp
Limit value
Standstill detection
v (t)
s (t)
Tolerance window
Standstill position
1
0
1
0
1
0
SS1 Activate
Ready
STO Acknowledge
SOS
t2
1
0
SS2 Activate
SSA Safe Standstill
Acknowledge
Fig.: Safety function SS2
} t
1
: Activation of safety function SS2
} t
2
: Activation of safety function SOS
} SS1 Activate: Input for safety function SS1
} SS1 SIL3/Reset: Input for SIL 3 and reset
} SS2 Activate: Input for safety function SS2
} Ready: Output for operating status of safety card and second output for feedback from
safety function STO
} STO Acknowledge: Output for feedback from safety function STO
} SSA Safe Standstill Acknowledge: Output for feedback from limit value monitoring
4.3.4 Safe Operating Stop ­ SOS
The safety function "safe operating stop" (SOS) monitors the standstill position that has
been reached. An error will activate safety function SS1 (E­STOP braking ramp).
Features of the safety function:
} The drive’s control functions are maintained in the standstill position.
} Power to the motor is not shut down.