Pilz PMCprimo DriveP.01/AA0/4/0/0/208-480VAC - Manual (Page 12)

Safety
Operating Manual PMCprotego S1­2(­C)
1002528­EN­02 12
3.1.5 Disposal
} In safety­related applications, please comply with the mission time t
M
in the safety­re­
lated characteristic data.
} When decommissioning, please comply with local regulations regarding the disposal of
electronic devices (e.g. Electrical and Electronic Equipment Act).
3.2 Standards
Knowledge of and compliance with the relevant standards and directives are a prerequisite
for using the safety card. The following standards are relevant:
} EN 61326­3­1:2008: Electrical equipment for measurement, control and laboratory use
­ EMC requirements
} EN 61800­3:2004: Adjustable speed electrical drives
} EN 61800­5­2:2007: Adjustable speed electrical power drive systems – Part 5­2: Safety
requirements. Functional
} EN ISO 13849­1:2008: Safety of machinery – Safety­related parts of control systems –
Part 1: General principles for design, Part 2: Validation
} EN 61508:1998: Functional safety of safety­related electrical/electronic/programmable
electronic control systems, Parts 1, 3, 4
} EN 61508­2:2000: Requirements for safety­related electrical/electronic/programmable
electronic systems
} EN 60204­1:2007: Safety of machinery – Electrical equipment of machines – Part 1:
General requirements
} EN 62061:2005: Safety of machinery – Functional safety of safety­related electrical,
electronic and programmable electronic control systems
Please note this is not an exhaustive list of safety standards and directives.