Pilz PNOZ mm0.2p - Manual (Page 4)

Contents
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
2
6.2.2 Using the chip card 6-2
6.2.3 Commissioning the PNOZmulti safety sys-
tem 6-2
6.2.3.1 Load project from chip card 6-3
6.2.3.2 Load project via USB port 6-3
6.2.4 Connection 6-3
6.2.5 Connection of two base units 6-5
6.2.5.1 Interface assignment 6-5
6.2.5.2 Connection 6-6
6.3 Connection examples 6-7
6.3.1 Connection of multiple base units via the
integrated interface 6-7
6.3.1.1 Example 1: Series connection of 3 base
units 6-7
6.3.1.2 Example 2: Connection of 5 base units 6-8
Chapter 7 Operation
7.1 Rotary knob 7-1
7.1.1 Function 7-1
7.1.2 Pull out and retract the knob 7-1
7.1.3 Rotate and press the knob 7-1
7.2 Messages 7-2
7.2.1 Display elements 7-2
7.2.1.1 Status indicators 7-2
7.2.1.2 Display 7-3
Chapter 8 Technical Details
8.1 Technical details 8-1
8.2 Maximum capacitive load C (
μ
F) with load
current I (A) at the semiconductor outputs
8-5
8.3 Maximum permitted total current of the
semiconductor outputs 8-6
8.4 Order reference 8-7