Pilz PNOZ mm0.2p - Manual (Page 38)

7.2 Messages
7 Operation
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
7-2
7.2 Messages 7200 Messages 7- Betrieb_Meldungen_Basis_BA
The PNOZmulti control system is ready for operation when the "POW-
ER" and "RUN" LEDs on the base unit are lit continuously.
7.2.1 Display elements
Display elements 7-
7.2.1.1 Status indicators
Status indicators 7- Anzeige Legende 3x
Legend:
7.2.1.2 Display elements for device diagnostics
Display elements for device diagnostics 7- Betrieb_Anzeige_mini_multi_Basis_BA
LED on
LED flashes
LED off
Basic Errors
RUN DIAG FAULT IFA
U
LT
OFAULT
The existing user program has been deleted.
External error on the base unit, leading to a safe condition, e.g. chip card not in-
serted
External error on the outputs of the base unit, e.g. short across the contacts, lead-
ing to a safe condition.
Internal error on the base unit
Internal error on the base unit (inputs)
Internal error on the base unit (outputs)
Base unit in a STOP condition
External error on the inputs of the base unit, which does not lead to a safe condi-
tion, e.g. partially operated.
External error on the outputs of the base unit, which does not lead to a safe condi-
tion, e.g. feedback input defective.
The fieldbus module has not been recognised.
Or
The base unit was identified by the PNOZmulti Configurator via the Ethernet inter-
face.
Or
An existing fieldbus connection was interrupted.