EXFO IQS-1600 High-Speed Power Meter for IQS-500/600 - Manual (Page 35)

Setting Up Your High Speed Power Meter
High Speed Power Meter 27
Managing Wavelength Lists
Managing Wavelength Lists
The wavelengths you want to use with your IQS-1600 and OHS-1700 must
be entered in the Wavelength list. Please refer to the Certificate of
Compliance supplied with your power meter for information on the
wavelength range.
To add a wavelength to the list:
1. From the Settings function tab, select the Lists tab.
In the New Value list, enter the wavelength value to be added.You can
enter a value with a 0.01 nm resolution.
2. Click to confirm the new wavelength.
Note: A warning message is displayed if the new wavelength is not within the
power meter’s wavelength range.
To delete a wavelength from the list:
1. From the Settings function tab, click the List tab.
2. From, the Wavelength list,select the wavelength to be deleted.
3. Click to confirm the operation.
Note: It is not possible to delete a wavelength that is currently being used.