EXFO IQS-1600 High-Speed Power Meter for IQS-500/600 - Manual (Page 148)

SCPI Command Reference
140 IQS-1600
Product-Specific Commands—Description
:MMEMory[1..n]:ACQuisition
Description This command initiates a data acquisition.
Acquires data at the selected sampling rate. The
acquisition will be saved to the system hard disk
in the file :
The acquisition will continue for the duration
specified in the MMEM:ACQ:DUR command.
Syntax :MMEMory[1..n]:ACQuisition
,CONT|NCONt
Parameter(s)
³
StartStop:
The program data syntax for is
defined as a element.
The special forms ON and OFF are
accepted on input for increased readability. ON
corresponds to 1 and OFF corresponds to 0.
This parameter allows to change the state of an
acquisition:
0 or OFF - Stops the acquisition.
1 or ON - Starts the acquisition.
³
AcqType:
The program data syntax for the second
parameter is defined as a
PROGRAM DATA> element. The allowed
elements for
this parameter are: CONT|NCONt.