EXFO IQS-1600 High-Speed Power Meter for IQS-500/600 - Manual (Page 139)

SCPI Command Reference
High Speed Power Meter 131
Product-Specific Commands—Description
:INITiate[1..n]:AUTO
Description This command starts or stops an acquisition
using the number of points set with the
TRAC:POIN command, and the sampling rate set
with the SENS:FREQ[:CONT] or
SENS:FREQ:NCON commands. To start an
acquisition in non-continuous mode, no channel
must be set to auto scale.
Syntax :INITiate[1..n]:AUTO,CONT|
NCONt
Parameter(s)
³
StartStop:
The program data syntax for is
defined as a element.
The special forms ON and OFF are
accepted on input for increased readability. ON
corresponds to 1 and OFF corresponds to 0.
This parameter changes the state of an
acquisition:
0 or OFF - Stops the acquisition.
1 or ON - Starts the acquisition.
³
AcqType:
The program data syntax for the second
parameter is defined as a
PROGRAM DATA> element. The allowed
elements for
this parameter are: CONT|NCONt.