EXFO IQS-1600 High-Speed Power Meter for IQS-500/600 - Manual (Page 225)

SCPI Command Reference
High Speed Power Meter 217
Product-Specific Commands—Description
:TRIGger[1..n][:SEQuence]:SLOPe
Description This command sets the edge status of the trigger
condition. It defines whether acquisitions will be
triggered on positive or negative transitions.
Syntax :TRIGger[1..n][:SEQuence]:SLOPeNEGati
ve|POSitive
Parameter(s) Slope:
The program data syntax for the first parameter is
defined as a
element. The allowed
DATA> elements for this parameter are:
NEGative|POSitive.
This parameter sets the trigger edge.
NEGative - represents a falling edge trigger.
POSitive - represents a rising edge trigger.
Example(s) TRIG:SEQ:SLOP POS
See Also TRIGger{:SEQuence]:SLOPe?
TRIGger[:SEQuence]:LEVel
TRIGger:POSition
TRIGger:POSition:CATalog?
TRIGger[:SEQuence]:STATe
TRIGger[:SEQuence]:SOURce