EXFO IQS-1600 High-Speed Power Meter for IQS-500/600 - Manual (Page 223)

SCPI Command Reference
High Speed Power Meter 215
Product-Specific Commands—Description
:TRIGger[1..n][:SEQuence]:LEVel
Description This command sets the power level of the trigger
condition to be met before starting an acquisition
in W or W/W depending on the selected unit.
Syntax :TRIGger[1..n][:SEQuence]:LEVel
erPowerLevel>
Parameter(s) TriggerPowerLevel:
The program data syntax for
is defined as a
NUMERIC PROGRAM DATA> element.
Sets the power level of trigger.
Example(s) TRIG:SEQ:LEV 1E-6
See Also TRIGger[:SEQuence]:LEVel?
TRIGger:POSition
TRIGger:POSition:CATalog?
TRIGger[:SEQuence]:STATe
TRIGger[:SEQuence]:SOURce
TRIGger[:SEQuence]:SLOPe