EXFO IQS-1600 High-Speed Power Meter for IQS-500/600 - Manual (Page 17)

High Speed Power Meter 9
3 Getting Started with Your
High Speed Power Meter
This chapter contains information on how to insert and remove test
modules. You will also find how to connect your optical head to your
power meter and how to start and exit the application.
Inserting and Removing Test Modules
To insert a module into the controller or expansion unit:
1. Exit IQS Manager and turn off all your units.
2. Remove the protective cover from the desired unused module slot.
2a. Pull the retaining screw knob firmly towards you and release the
bottom of the cover.
2b. Gently pull the top of the protective cover downwards, to remove
it from the unit grooves.
C
AUTION
Never insert or remove a module while the controller unit and its
expansion units are turned on. This will result in immediate and
irreparable damage to both the module and unit.
Retaining screw
knob
Protective cover
2b
2a