EXFO IQS-1600 High-Speed Power Meter for IQS-500/600 - Manual (Page 229)

SCPI Command Reference
High Speed Power Meter 221
Product-Specific Commands—Description
:TRIGger[1..n][:SEQuence]:STATe
Description This command sets the state of the trigger
condition.
Syntax :TRIGger[1..n][:SEQuence]:STATe
erState>
Parameter(s) TriggerState:
The program data syntax for is
defined as a element.
The special forms ON and OFF
are accepted on input for increased readability.
ON corresponds to 1 and OFF corresponds to 0.
This parameter sets the trigger state.
0 - Trigger condition deactivated
1 - Trigger condition activated
Example(s) TRIG:SEQ:STAT 0
See Also TRIGger[:SEQuence]:STATe?
TRIGger[:SEQuence]:LEVel
TRIGger:POSition
TRIGger:POSition:CATalog?
TRIGger[:SEQuence]:SOURce
TRIGger[:SEQuence]:SLOPe