EXFO FTB-8500 Series for FTB-500 - Manual (Page 95)

Creating and Starting a Test Case
Ethernet and Fibre Channel Application 81
Ethernet EtherSAM (Y.1564) and RFC 2544 Dual Test Set Test Cases
3. Optical configuration for Ethernet 10G interface only:
3a. Select the Transceiver Mode Choices
are Local Area Network (LAN) for
regular Ethernet interface
(10.31250Gb/s) and Wide Area Network
(WAN) for Ethernet stream
encapsulated inside a SONET/SDH frame structure (9.95328Gb/s).
Choices availability depend on the unit model and options refer to
Software Options on page 378 for more information.
3b. Select the source Clock Mode (WAN transceiver mode only).
Refer to Clock Synchronization on page 383 for more information.
3c. Press Next.
3d. Enter the J0 Trace and J1 Trace
messages (WAN transceiver mode
only). Refer to WIS TX on page 241 for
more information.
3e. Press Next.