beautypg.com

Ip/udp/tcp, Stream no, Source – EXFO FTB-8500 Series for FTB-500 User Manual

Page 237

background image

Stream Generation Tabs

Ethernet and Fibre Channel Application

223

IP/UDP/TCP

IP/UDP/TCP

Note: Only available when the network stream configuration is set to IPv4,

MPLS/IPv4, IPv6, or MPLS/IPv6.

Press TEST, Stream Gen, and IP/UDP/TCP.

Stream No.

For Frame Analyzer test, select the stream number from the list. Only
stream number 1 is available for RFC 2544 and BERT tests.

Source

For IPv4:

IP Address: Enter the IP address for the selected stream. The default
setting is 10.10.x.x, where x and y are respectively the two least
significant bytes of the port default MAC address.

Subnet Mask: Enter the Subnet Mask for the selected stream. The
default setting is 255.255.0.0.

This manual is related to the following products: