EXFO FTB-8500 Series for FTB-500 - Manual (Page 219)

Stream Generation Tabs
Ethernet and Fibre Channel Application 205
Overview

Data Link: Select the data link type (layer 2). Choices are
Ethernet II and 802.3 SNAP.
Note: Network, and Transport are not available with RFC 2544 test. Only data
link frame size is available with BERT - Framed Layer 1 test.

Network: Select the network traffic type (layer 3). Choices are IPv4
or IPv6, and None. The default setting is IPv4.

Transport: The Transport is set to UDP. Transport is automatically
disabled when Network is set to None.

Size: Select the frame size for each traffic type.
For Framed Layer 1, only the Data Link is configurable from 48 to
10000 for 10Mbps, and 16000 for 100Mbps/1000Mbps/10Gbps.
For Framed Layer 2, choices are:
Traffic Type
Frame Size
Minimum Maximum
10 Mbps
100/1000 Mbps
and 10 Gbps
Data Link 48
a
a. The minimum frame size will be adjusted according to the frame structure and
components selected.
10000 16000
Network 46
a
9982 15982
Transport
UDP
TCP
26
a
38
a
9962 15962