EXFO FTB-8500 Series for FTB-500 - Manual (Page 418)

Tools Tabs
404 FTB-8500 Series and FTB-8120NGE/8130NGE
ADC Configuration
ADC Configuration
Note: The ADC Config tab is only available when ADC is selected as the ENIU
type. In order for the configuration to work, the ADC ENIU needs to be set to
EXFO mode. Not available with 10Gig-E.
Press Tools, ENIU, and ADC Config.
Remote ENIU List
Lists the detected ENIUs on the network or part of the Ethernet and
Fibre Channel Application VLAN domain when VLAN is enabled. Up to 20
ENIUs can be listed.

ID: Indicates the ENIU number. The ENIUs are sequentially numbered
as they are detected.

System Name: Indicates the name of the detected ENIU.

MAC Address: Indicates the MAC address of the detected ENIU.

Loopback Status: Indicates the loopback status (Enabled/Disabled) of
the ENIU.