EXFO FTB-8500 Series for FTB-500 - Manual (Page 39)

Physical Interfaces and LEDs
Ethernet and Fibre Channel Application 25
FTB-8120NGE and FTB-8130NGE Models
The following table shows the list of available ports as well as a description
and signals supported for each model.
Electrical 10/100/1000 Mbps Ethernet
The FTB-8120NGE/FTB-8130NGE module provides one electrical port for
10Base-T, 100Base-TX, or 1000Base-T.
Port connector type is RJ-45 for category 5 unshielded twisted pair (UTP)
connection.
Note: Refer to section A for cable specifications.

Connect the 10/100/1000 electrical signal to be tested to the port
ETHERNET 10/100/1000 of the FTB-8500 Series and
FTB-8120NGE/8130NGE module.
Port labelled Description Supported signal(s) Model
100M-4.25G Optical IN/OUT port small
form pluggable (SFP)
Fibre Channel 1x, 2x, and 4x
Ethernet 100 Mbps and 1
Gbps
FTB-8120NGE
FTB-8130NGE
10G-11.3G Optical IN/OUT port small
form pluggable (XFP)
Fibre Channel 10x
Ethernet 10 Gbps
FTB-8130NGE
Ethernet
10/100/1000M
Electrical Ethernet port
RJ-45
10/100/1000 Mbps
(electrical)
FTB-8120NGE
FTB-8130NGE
AUX Electrical port BNC DS1/1.5M/E1/2M or 1PPS
signal for external clock
synchronization.
FTB-8120NGE
FTB-8130NGE
REF OUT Reference output port SMA FTB-8130NGE