beautypg.com

EXFO FTB-8500 Series for FTB-500 User Manual

Page 88

background image

Creating and Starting a Test Case

74

FTB-8500 Series and FTB-8120NGE/8130NGE

EtherSAM (Y.1564) Test Case

3. Optical configuration for Ethernet 10G interface only:

3a. Select the Transceiver Mode Choices

are Local Area Network (LAN) for
regular Ethernet interface
(10.31250Gb/s) and Wide Area Network
(WAN) for Ethernet stream
encapsulated inside a SONET/SDH frame structure (9.95328Gb/s).
Choices availability depend on the unit model and options refer to
Software Options on page 378 for more information.

3b. Select the source Clock Mode (WAN transceiver mode only).

Refer to Clock Synchronization on page 383 for more information.

3c. Press Next.

3d. Enter the J0 Trace and J1 Trace

messages (WAN transceiver mode
only). Refer to WIS TX on page 241 for
more information.

3e. Press Next.

4. Port and framing

configuration:

4a. Set the

Auto-Negotiation,
Speed, Duplex, and
Flow Control
parameters. Not
available with Ethernet
10G. Refer to Interface
Setup (Ethernet)
on
page 140 for more
information.

4b. Set the VLAN parameters when required. Refer to Network on

page 148 for more information.

This manual is related to the following products: