EXFO FTB -5240S/5240BP Optical Spectrum Analyzer - Manual (Page 380)

SCPI Command Reference
374 FTB-5240S/S-P/BP
Product-Specific Commands—Description
:CALCulate[1..n][:WDM]:CHANnel:AUTO:
NOISe:WIDTh:[WAVelength]
Description This command sets the wavelength width of the
noise measurement region of the WDM analysis
default channel.
At *RST, the width of the default channel noise
measurement region is set to 100.0 GHz.
Syntax :CALCulate[1..n][:WDM]:CHANnel:AUTO:NOISe:
WIDTh:[WAVelength]M]
>|MAXimum|MINimum|DEFault
Parameter(s) Width:
The program data syntax for is defined
as a element followed by an
optional element.
The allowed
element is M. The special forms
MINimum, MAXimum and DEFault are accepted
on input.
MINimum allows to set the instrument to the
smallest supported value.
MAXimum allows to set the instrument to the
greatest supported value.