EXFO FTB -5240S/5240BP Optical Spectrum Analyzer - Manual (Page 11)

Introducing the FTB-5240S/S-P/BP Optical Spectrum Analyzer
OSA 5
Post-Processing Application
Post-Processing Application
A post-processing, or offline version of the application is available for you to
use on a conventional computer. This offline version has most of the
module application, but does not allow you to perform acquisitions.
WDM
Investigator
(Inv)
This option activates the WDM Investigator mode
measurement diagnostics.
When this option is activated, it is possible to have access
to qualitative analysis of the noise source in measurement
results for each channel through the WDM Investigator
dashboard.

Qualitative analysis of the noise source in
measurement results for each channel through the
WDM Investigator dashboard

Qualitative analysis of the PMD pulse spreading on live
noncoherent signals
Note: Not supported by the 5240S module but
supported by the 5240S-P module.
Note: The WDM Investigator (Inv) software option
is dependent on the InBand (InB) option. The
InBand (InB) option must be enabled for the
WDM Investigator (Inv) software option to
work.
Commissioning
(Com)
The commissioning option can be used to test channels
individually by comparing one channel at a time with a
trace where all channels are enabled (or on).
Option Name Description