Ditch Witch JT25 - Manual (Page 77)

Drive - 76
JT25 Operator’s Manual
Start Unit
CMW
Start Unit
1. Insert key.
2. Turn key clockwise. See page 23 for more information.
3. Run engine at low throttle for 5 minutes.
Steer Unit
To steer drilling unit while using tethered ground drive controller, follow instructions for type of steering
desired .
To steer while moving forward, push forward and move to left or right. Drilling unit
will turn to left or right.
To steer while moving backward, pull back and move to left or right. Drilling unit
will turn to left or right.
For tight steering in low speed, move control to left or right limit, then forward or
backward as needed. Tracks will counter-rotate and turn drilling unit in a tight circle.
c00ic145h.eps