Ditch Witch JT25 - Manual (Page 179)

Service - 178
JT25 Operator’s Manual
50 Hour
CMW
Lube SaverLok Collar
Lube SaverLok collar with EPS every 50 hours.
To lube:
• Stop engine and turn battery disconnect switch
to the off position.
• Clean exposed portion of sliding output shaft
with pressure washer to remove grime.
• Blow dry with compressed air.
• Apply EPS spray lube to all exposed shaft
surfaces while manually moving the shaft in
and out.
• Turn battery disconnect switch to the on position.
Check Heavy-Duty Anchor Driver
Gearbox Oil Level (Optional)
Check heavy-duty anchor driver gearboxes oil level
at fill plug (shown) every 50 hours. Add MPL at fill
as needed.
IMPORTANT: Gearbox must be level for
accurate reading.
j37om058h.eps j37om058h.eps