Ditch Witch JT25 - Manual (Page 189)

Service - 188
JT25 Operator’s Manual
As Needed
CMW
Check Pipeloader Inserts
Check pipeloader inserts at indicated areas for
wear. Flip gripper inserts for longer wear, or
replace as needed. See your Ditch Witch dealer for
replacement parts.
1. Shuttle gripper pad
2. Wear pad
3. Slide pad
Check Pipe Guide Inserts
Check pipe guide inserts (2, 4) for wear. Rotate
inserts for longer wear, or replace as needed. See
your Ditch Witch dealer for replacement parts.
To replace:
1. Remove lynch pins (1) and open pipe guide.
2. Remove guide inserts (2).
3. Remove lynch pins (3) and open pipe guide.
4. Remove guide inserts (4).
5. Replace in reverse order.
Check Fluid Pump Ball Valve
Check ball valve for leaks. Tighten stem packing as
needed. See your Ditch Witch dealer for
replacement packing.
IMPORTANT: Ensure bolts are tightened evenly
to enable inserts to slide freely and wear evenly.
11
22
33
j37om040h.eps j37om040h.eps
2
3
1
4
j37om046h.eps j37om046h.eps
j37om049h.eps j37om049h.eps