Jt25 operator’s manual – Ditch Witch JT25 User Manual
Page 35
Controls - 34
JT25 Operator’s Manual
Right Control Console
Item
Description
Notes
1.
Diagnostic light (red)
If system is OK, light should
be off.
If system may not be getting
power, light should be on.
If a non-essential diagnostic
code is recorded, light should
flash on and off for 10
seconds.
If an essential diagnostic
code is recorded, light should
flash on for three seconds
and off for half a second.
See “Diagnostic Codes” on page 142.
2.
Rear stop status light
If carriage is at rear stop, light
should be on.
If carriage is away from rear
stop, light should be off.
3.
Rear home status light
If carriage is at rear of drill
frame, light should be on.
If carriage is away from rear
of drill frame, light should be
off.
4.
Front home status light
If carriage is at front of drill
frame, light should be on.
If carriage is away from front
of drill frame, light should be
off.
c00ic617h.eps
c00ic618h.eps
c00ic619h.eps
- JT5 (161 pages)
- JT922 (159 pages)
- JT9 (165 pages)
- JT20 (195 pages)
- JT1220 (201 pages)
- JT2020 (203 pages)
- JT30 (245 pages)
- JT60 (218 pages)
- JT100 (243 pages)
- AT Air Hammer (11 pages)
- TK Series Manual (61 pages)
- 8500 (77 pages)
- MR90 (121 pages)
- FT5 (28 pages)
- FM5 (57 pages)
- FM13V (46 pages)
- FM25 (67 pages)
- P80 (71 pages)
- OnGrade (63 pages)
- FX20 (100 pages)
- FX25 (119 pages)
- FX30 (149 pages)
- FX50 (141 pages)
- FX60 (157 pages)
- MV800 (111 pages)
- RT Line (115 pages)
- RT30 (97 pages)
- RT45 (203 pages)
- RT55 (177 pages)
- RT100 (161 pages)
- RT115 (252 pages)
- RT120 (223 pages)
- Zahn (105 pages)
- RT80 (203 pages)
- RT115 Q (193 pages)
- RT120 Q (211 pages)
- 100SX (50 pages)
- 410SX (131 pages)
- SK350 (77 pages)
- SK750/SK755 (81 pages)
- SK850 (107 pages)
- SK850 Footings Machine (107 pages)
- 150RT (55 pages)
- 250RT (49 pages)