Ditch Witch JT25 - Manual (Page 40)

JT25 Operator’s Manual
Controls - 39
Right Control Console
6. Operator’s station pivot
control switch To pivot into drilling position,
press top.
To pivot into transport
position, press bottom.
NOTICE: Move carriage only when
operator’s station is in drilling position.
7. Add pipe/manual/
remove pipe switch To select “add pipe”
automated pipeloader
function, press top.
To use manual pipeloader
controls, move to center.
To select “remove pipe”
automated pipeloader
function, press bottom.
See “Add Pipe” on page 94.
See “Remove Pipe” on page 103.
8. Drilling fluid pump
switch To turn on, press once.
To turn off, press once.
9. Drilling fluid quick fill
switch For full pump flow to fill pipe
with fluid, press and hold.
To return fluid flow to flow
control setting, release.
Item Description Notes
c00ic624h.eps