Ditch Witch JT25 - Manual (Page 39)

Controls - 38
JT25 Operator’s Manual
Right Control Console
2. Thrust and rotation
control To move carriage forward,
push.
To move carriage backward,
pull.
To rotate spindle
counterclockwise (breakout),
move right.
To rotate spindle clockwise
(makeup), move left.
3. Remote engine start
switch To start engine, press. IMPORTANT: Ignition switch on rear
console must be on to start engine
remotely.
4. Remote engine stop
switch To stop engine, press.
To restart engine, press
remote engine start switch.
IMPORTANT:
• If this switch is used to stop
drilling unit, be sure to turn
ignition switch off if machine will
be left unattended for long
periods of time. Battery discharge
can occur.
• If wrenches are engaged when
remote stop is pressed, wrenches
will remain engaged but could
gradually open.
5. Anchor enable control Press to activate pump and
allow flow to the anchor valve.
Sit in operator’s seat to return
pump to standby mode and
stop flow.
Item Description Notes
c00ic622h.eps