Delta RMC101 - Manual (Page 23)

RMC100 Startup RMC100 Modules
23
deltamotion.com
RMC100 Modules
This section gives an overview of the communications and feedback capabilities of
the modules available for the RMC100.
Configuring an RMC100
The RMC100 series motion controllers have a modular design for configuration
flexibility to meet the needs of a wide variety of applications. Due to this modular
design, Delta is typically able to ship any of the more than 500 available
configurations in 2 weeks or less. However, unlike many modular systems, each
RMC controller is configured at the factory and fully assembled and tested as a
complete unit before shipping.
The RMC100 controllers are packaged in compact din-rail mount enclosures.
Within the package, the first two modules are the communications and the CPU.
Then, one to four modules are added for I/O. Each module adds 1 inch to the
package width, resulting in four different footprints ranging from 4.12 x 5.95 to
7.12 x 5.95 inches. All of the RMC100 motion modules handle two axes resulting
in configurations with two, four, six, or eight axes. Almost any combination can be
specified to fit almost any application: linear or rotary, position, pressure, or
position/pressure control.
Configuration Tool
The RMC Configuration Tool on the Delta website at www.deltamotion.com,
makes determining the best motion controller for a specific application quick and
easy.
The RMC Configuration Tool provides informative screens that show all
communication, control, and interface choices that are available for the RMC100
family of motion controllers. Links are provided to detailed information on every
RMC100 module, and users can request a price quote and additional information on
any specific configuration.
Look for this button
on the website!