Delta RMC101 - Manual (Page 14)

Getting Started RMC100 Startup Guide
14
deltamotion.com
After performing the startup, save your configuration settings. See the appropriate
online Help topic for more information.
Step-by-Step Example
Appendix D contains a step-by-step, illustrated example of setting up and tuning a
hydraulic cylinder. Read this to see the practical details of setup and to learn how to
use the plots to tune the axis. This will help you to quickly set up and control a
hydraulic system!
Communications
After setting up and tuning your system, it is ready to be programmed and
integrated into the rest of your application. The RMC100 offers numerous
communication options for this purpose.
The purpose of communications is to issue commands and read back status
information. Available RMC100 communications modules include Modbus Plus,
PROFIBUS-DP, Serial, and Ethernet. A simple communications interface between
the RMC100 and the system controller or Programmable Controller (P/C) is also
provided by the Digital I/O module.
See the RMC Modules section of this document for a short overview of each, and
the communications section of the online Help for more detailed information.
Index/digital
I/O/communication
Index/step-by-step startup. Scroll to
Step 9.